KA-3 - VINH QUANG RC MODELS

 KA-3            (Glider 3,0m Wingspan)

The Ka-3 and its predecessor the Ka-1 were mostly sold as kits for home assembly. Apart from their fuselages the two types are very close in appearance, simplicity, weight and performance. They share a round tipped high wing with constant chord and no sweep, mounted with 2.5° of dihedral and braced with a single lift strut on each side from the lower fuselage to the wing at about one third span. Plain, constant-chord lt ailerons reach almost from the tips to about mid span and upper wing spoilers are placed at mid chord, inboard of the ailerons. Both have 37° butterfly tails with straight leading edges and round tips and trailing edges.

 Features:
- All Balsa and lite-ply construction
- Fully covered in weathered detail
- Control surfaces pre-hinged and installed
- Two piece wing with aluminium wing joiner
- Big battery hatch for Electric version
- Electric Motor mount
-Cover by Oratex

 Specifications:
- Wingspan: 3050mm
- Fuselage: 1675mm
- Weight (ready to fly): 3.5kg - 3.6kg
- Electric motor: Boost 40
- Radio req: 5-7 channel / 4-5 servos

 Includes:
- Assembly instructions with stage photos
- Electric motor mount
- Aluminium wing joiner
- Decals and all hardware

Does not include: radio, motor, glue, and silicon fuel line

Product code:  VQA079

Photo gallery